bluetooth speakers dampf

Demista

In over 30 years, demista®, a UK-based company has been manufacturing ultra-slim heated mirror pads to hotel bathroom mirrors to prevent steaming, clouding and streaking.

The difference is clear.

Proven track record of being specified in hotel developments globally.

Manufactured in the UK and approved to international standards, the unique technology ensures demista is the brand of choice for architects and interior designers across the globe and in a number of market sectors including hospitality, housing, marine, commercial, leisure and DIY.

Steam-free bathroom mirrors since 1990.

bluetooth speakers for hotels

Technology

Demista’s unique, proven technology ensures cloudy mirrors are a thing of the past. Simple to fit and cost-effective, demista ultra-slim heated mirror pads fit inconspicuously to new, or existing, bathroom mirrors and utilize innovative technology to give complete temperature stability with resistance to moisture, vibration, shock, dust, and aging.

Over 400 Sizes Available

These bathroom heating pads can cover any mirror in 230V, 120V, 24V, 12V and bespoke sizes if required. 

They are long-lasting, cost-effective, and easy to install. 

Inquire about our sizes today.

Guaranteed

All of their heated mirror pads are completely manufactured in the UK and carry a 10-year warranty.

Easy to install

Protected by a 10-year warranty against any manufacturing fault, when installed in accordance with instructions.

FAQ

Q: My mirror has a thin board on the back, can I fit the pad to the board & still clear the mirror?

A: The board is a good insulator, the pad must be fitted directly to the mirror.

Q: My mirror has a foiled safety backing, can I still use a heat pad?

A: Yes, you can still use our pad, you will be required to earth the foil backing and any metal frame by using an earth grounding pad, which is available from your supplier of demista directly.

Q: My mirror has fixing holes/cut-outs, can I still install a heat pad?

A: Yes you can still use a heat pad, please ensure that you contact your suppliers / demista for advise as mounting a heat pad to close too any hole/cut-out can cause the mirror to crack.

Q: I have a cupboard door, can I use a demista pad on the door?

A: Yes, demista always recommends the low voltage option.

Q: How long is the cable? Can it be extended?

A: The standard length of cable is 1m. The cable can be extended by using a suitable junction box. Alternatively, at the time of ordering, demista pads can be manufactured with longer cables if required, at an additional cost.

Q: Can I fit the pad to the wall first then fit the mirror onto the pad?

A: No, you must install the pad onto the mirror first, as failure to do this will affect the effectiveness of the pad, which could cause an air bubble, which could crack the mirror.

Q: What area will the pad heat?

A: Our pads will heat an area up to 30% larger than the pad size itself. Depending on ambient room temperature, and installed as per our installation instructions.

IMPORTANT

The demista pad should not be used if the mirror has any damage, the pad must not be cut or pierced as this will render the pad unsafe to use. As the ambient room temperature rises, so will the surface temperature of the mirror. Once the demista has been installed it must not be accessible.

The manufacturer/supplier cannot be held responsible for any damage caused by improper installation or use.